Support de 50,8Êcm pour Žtagres en fil
+ / - Survoler l'image pour effectuer un zoom
  • Soutient la lèvre avant des étagères
  • Utilisez 1 support tous les 91,4 cm et à chaque extrémité de l'étagère
  • À utiliser avec des étagères en fil ClosetMaid®
  • Le paquet de supports de 30,5 cm contient 2 supports, 2 chevilles d'ancrage et 2 chevilles n° 8

Support

SKU :050054001
7 RatingsRatReviewSumID: 1282
average: 2.7
number of reviews: 7

...........
one star: 4, two star: 0, three star: 0, four star: 0, five star: 3,
6,00 $ à 8,00 $

Support de 50,8 cm pour étagères en fil

Color :
Le prix du produit peut être mis à jour en fonction de votre sélection
  • Blanc
Color:
Height:
Depth:
Width:
Points de vente
Où acheter
Coordonnée

Un élément clé de votre système d'ancrage fixe. Utilisez un support de 30,5 cm pour toutes les étagères de 30,5 et de 40,6 cm de profondeur lorsqu'utilisé pour suspendre des vêtements. Utilisez un support de 40,6 cm pour toutes les étagères de rangement de 40,6 cm de profondeur. Utilisez un support de 50,8 cm pour toutes les étagères Close Mesh de 50,8 cm de profondeur.

  • Soutient la lèvre avant des étagères
  • Utilisez 1 support tous les 91,4 cm et à chaque extrémité de l'étagère
  • À utiliser avec des étagères en fil ClosetMaid®
  • Le paquet de supports de 30,5 cm contient 2 supports, 2 chevilles d'ancrage et 2 chevilles n° 8
  • Le paquet de supports de 40,6 et 50,8 cm contient 1 support, 1 cheville d'ancrage et 1 cheville n° 8
  • Matériau : acier enduit d'époxyde
Write a Review
Envoyer
Customer reviews:
  • 5 / 5
Dave is right, install properly!
Allan
2018-01-19
At first I thought it was a bad design because I installed it wrong. Now even with a moderate load and me trying to get it to fall, it holds like a champ.
ID: 3982, TEXT: At first I thought it was a bad design because I installed it wrong. Now even with a moderate load and me trying to get it to fall, it holds like a champ., TITLE: Dave is right, install properly!, EMAIL: privateman@ca.rr.com, CREATED: 2018-01-19 15:22:36.672, NICKNAME: Allan,
  • 5 / 5
No worries....
Badger412
2017-09-04
I've used these support brackets in three different houses in over 20 years. I've had no issues with them. I made sure that I used the right number of supports for the load and the length of the shelf. I have had no worries with them....
ID: 3622, TEXT: I've used these support brackets in three different houses in over 20 years. I've had no issues with them. I made sure that I used the right number of supports for the load and the length of the shelf. I have had no worries with them...., TITLE: No worries...., EMAIL: bdgarner12@comcast.net, CREATED: 2017-09-04 17:29:58.595, NICKNAME: Badger412,
  • 1 / 5
Changes made to this product from years past
PME
2017-06-28
BEWARE! - We had an already installed shelf "fall" from the wall. The reason was because the plastic clips broke. In the fall the two 12 inch metal support brackets bent. I went to my local big box store and bought two new metal support brackets. Came home to find out that the end that fits on the shelf has been changed and the material the new bracket is made out of is not as sturdy as my old now bent brackets. I will be returning the new brackets to my big box store and turning to eBay to purchase the older model sturdier brackets.
ID: 3527, TEXT: BEWARE! - We had an already installed shelf "fall" from the wall. The reason was because the plastic clips broke. In the fall the two 12 inch metal support brackets bent. I went to my local big box store and bought two new metal support brackets. Came home to find out that the end that fits on the shelf has been changed and the material the new bracket is made out of is not as sturdy as my old now bent brackets. I will be returning the new brackets to my big box store and turning to eBay to purchase the older model sturdier brackets., TITLE: Changes made to this product from years past, EMAIL: peuper@hotmail.com, CREATED: 2017-06-28 21:11:06.873, NICKNAME: PME,
  • 5 / 5
Install it right.
Dave
2017-06-26
Mine work great. To all the negative reviewers; it sounds like it was installed wrong. Try this: 1. Look at the top of your bracket where it connects to the shelf. It will look like 2 curved claws. 2. Use one wire on the platform (top of shelf) and fit it between these claws. Now the shelf is supported. If you are relying solely on the curvature of the claw to hold up the shelf it will definitely fall. Still don't understand? 1. make a "peace" sign with your hand. 2. use your other hand to karate chop straight down between your upturned fingers. 3. Congratulations. You have now successfully demonstrated how these brackets were designed to hold weight.
ID: 3525, TEXT: Mine work great. To all the negative reviewers; it sounds like it was installed wrong. Try this: 1. Look at the top of your bracket where it connects to the shelf. It will look like 2 curved claws. 2. Use one wire on the platform (top of shelf) and fit it between these claws. Now the shelf is supported. If you are relying solely on the curvature of the claw to hold up the shelf it will definitely fall. Still don't understand? 1. make a "peace" sign with your hand. 2. use your other hand to karate chop straight down between your upturned fingers. 3. Congratulations. You have now successfully demonstrated how these brackets were designed to hold weight., TITLE: Install it right., EMAIL: dave.beresford21@gmail.com, CREATED: 2017-06-26 23:48:22.743, NICKNAME: Dave,
  • 1 / 5
Actual rating is a ZERO
SKS
2017-04-13
My actual rating is a ZERO but I couldn't submit this review without at least one star. These brackets are useless with their 'over hook'. Closetmaid's help desk doesn't even call them 'support' brackets anymore. They said these are for preventing the shelf from popping out of the hooks. I am replacing cracked end brackets installed by builder 20 years ago. After reading all the other comments and lack of response by Closetmaid, I will not be purchasing their products anymore.
ID: 3430, TEXT: My actual rating is a ZERO but I couldn't submit this review without at least one star. These brackets are useless with their 'over hook'. Closetmaid's help desk doesn't even call them 'support' brackets anymore. They said these are for preventing the shelf from popping out of the hooks. I am replacing cracked end brackets installed by builder 20 years ago. After reading all the other comments and lack of response by Closetmaid, I will not be purchasing their products anymore., TITLE: Actual rating is a ZERO, EMAIL: stewartsg@sbcglobal.net, CREATED: 2017-04-13 17:31:26.703, NICKNAME: SKS,
  • 1 / 5
Same issue as above - shelf falls out of bracket.
PC
2017-03-02
As the other reviewer posted the shelf falls out of the angled bracket with very little weight on it. The idea of gripping the shelf from above as opposed to simply holding up from below makes no sense. These shelves were professionally installed. I am not impressed by this design.
ID: 3387, TEXT: As the other reviewer posted the shelf falls out of the angled bracket with very little weight on it. The idea of gripping the shelf from above as opposed to simply holding up from below makes no sense. These shelves were professionally installed. I am not impressed by this design., TITLE: Same issue as above - shelf falls out of bracket., EMAIL: peter@dachangs.com, CREATED: 2017-03-02 19:45:39.626, NICKNAME: PC,
  • 1 / 5
BAD Design
steadyfreddie
2017-02-17
(actually a "zero" star rating) Worst bracket design ever! It needs some positive way the shelf cannot fall (front of shelf rotating down). After installing per directions and loading shelf, everything came tumbling down with just a slight wrong touch. My solution was to wire the shelf and top bracket fork together.
ID: 3372, TEXT: (actually a "zero" star rating) Worst bracket design ever! It needs some positive way the shelf cannot fall (front of shelf rotating down). After installing per directions and loading shelf, everything came tumbling down with just a slight wrong touch. My solution was to wire the shelf and top bracket fork together., TITLE: BAD Design, EMAIL: mswenty@usa.net, CREATED: 2017-02-17 17:44:27.604, NICKNAME: steadyfreddie,