SuperSlide Universal Closet Rod Support
+ / - Hover over image to Zoom
  • Will not work with Close Mesh or Low Profile SuperSlide shelving
  • For use with older ClosetMaid shelving and competitors shelving
  • Use one every 36 in. of hang rod and at each end of shelf and hang rod
  • Attaches to wire shelving

Universal Closet Rod Support

SKU:565500
3 RatingsRatReviewSumID: 762
average: 3.7
number of reviews: 3

...........
one star: 0, two star: 1, three star: 0, four star: 1, five star: 1,
$6.18

SuperSlide Universal Closet Rod Support

Color:
  • White
White
Height:
  • 5.75
Width:
  • 0.87
Depth:
  • 3.87
Add to Cart
Please note, we only ship to addresses within the 48 contiguous states.
Retail Locations
Where to Buy
Coordinate

Converts Shelf & Rod shelving, 12 in. and 16 in. deep, to a continous slide. Just add the brackets and choose your length of ClosetMaid® hang rod. Hang rod snaps into bracket to create an continuous slide for hangers.

Write a Review
Submit
Customer reviews:
  • 2 / 5
Design flaw
Blake
Nov 16, 2019
These are easy to install and are very rugged except for one major design flaw. When installed on shelving that includes a built in rod (SHELF & ROD-CARTONED) they don't hold up. In that configuration the shelf wire fits through the bottom and top holes (as currently pictured in the example on the product page). The middle hole, used for other style shelves, is left empty. The plastic between it and the bottom hole is so thin it provides no support so all the weight is supported by the plastic above the top hole. It will eventually fail if you have the rod heavily loaded, sending the rod and clothes crashing to the floor. This happened to me in several bedrooms. To fix this I placed the supports at 12" spacing instead of the recommended 36" AND fashioned wooden plugs/dowels that snugly/completely fill the middle hole, providing the much needed support to the bottom rail of the shelf. Major pain but ... problem solved. I wish I could upload a picture to illustrate. Closet Maid could, at almost no cost, include plastic plugs to fill that middle hole in installations where it's not being used, making this product MUCH stronger. With that one small change this would be a 5 star review.
ID: 5361, TEXT: These are easy to install and are very rugged except for one major design flaw. When installed on shelving that includes a built in rod (SHELF & ROD-CARTONED) they don't hold up. In that configuration the shelf wire fits through the bottom and top holes (as currently pictured in the example on the product page). The middle hole, used for other style shelves, is left empty. The plastic between it and the bottom hole is so thin it provides no support so all the weight is supported by the plastic above the top hole. It will eventually fail if you have the rod heavily loaded, sending the rod and clothes crashing to the floor. This happened to me in several bedrooms. To fix this I placed the supports at 12" spacing instead of the recommended 36" AND fashioned wooden plugs/dowels that snugly/completely fill the middle hole, providing the much needed support to the bottom rail of the shelf. Major pain but ... problem solved. I wish I could upload a picture to illustrate. Closet Maid could, at almost no cost, include plastic plugs to fill that middle hole in installations where it's not being used, making this product MUCH stronger. With that one small change this would be a 5 star review., TITLE: Design flaw, EMAIL: robertson.inbox@gmail.com, CREATED: 2019-11-16 09:48:02.324, NICKNAME: Blake,
  • 5 / 5
Works Well
Kayak
Mar 27, 2016
Everything worked as advertised. It took about 15 minutes to install 4 rods. The only complaint is that it is way too pricey for a $1 part.
ID: 2921, TEXT: Everything worked as advertised. It took about 15 minutes to install 4 rods. The only complaint is that it is way too pricey for a $1 part., TITLE: Works Well, EMAIL: jllane360@gmail.com, CREATED: 2016-03-27 12:12:43.037, NICKNAME: Kayak,
  • 4 / 5
Maint.
elmer
Mar 28, 2015
I manage a property with 49 units. All closets have closetmaid storage installed. In less than 2 years, I replaced 50-60 of the old J hooks that came with the shelving as they break continuously and are useless. I then purchased a dozen of these new universal brackets and they are the answer to the closet rod brackets! I am ordering more and replacing all the old brackets as they continue to fail.
ID: 1858, TEXT: I manage a property with 49 units. All closets have closetmaid storage installed. In less than 2 years, I replaced 50-60 of the old J hooks that came with the shelving as they break continuously and are useless. I then purchased a dozen of these new universal brackets and they are the answer to the closet rod brackets! I am ordering more and replacing all the old brackets as they continue to fail., TITLE: Maint., EMAIL: trucleaners0116@att.net, CREATED: 2015-03-28 22:38:16.816, NICKNAME: elmer,